CAB
PCB SEPARATOR MAESTRO 2, 2M
The compact MAESTRO 2 separates PCBs quickly and economically. Little footprint is required.
MAESTRO 2
is the affordable entry-level device to handle smaller demands. PCBs are fed between the circular blades manually to be separated.
is the affordable entry-level device to handle smaller demands. PCBs are fed between the circular blades manually to be separated.
MAESTRO 2M, motor-driven
to separate large numbers of PCBs without tiring. The lower circular blade is motor-driven. The PCB is fed, seized by the circular blade, transported and separated. The device especially fits with highly dense assembly or slim margin strips. Three speeds can be selected.
Safe operation
The distance between the holder 1 and the guide 2 is set so the PCB can be fed only in the milled groove.
The distance between the holder 1 and the guide 2 is set so the PCB can be fed only in the milled groove.
| Technical data | MAESTRO 2 | MAESTRO 2M |
|---|---|---|
| Separation method | Component side: Circular blade Solder side: Circular blade | |
| Operation | manual | motor-driven |
| Separation speed | - | 100, 200, 300 mm/s |
| Separation length | 15 - 300 mm | |
| Material | FR4 | |
| Component height | Solder/component side up to 34 mm | |
| Power supply | - | 230/115 VAC, 50/60 Hz |
| Temperature / humidity Operation Stock Transport | + 10 - 35°C / 10 - 85 % not condensing 0 - 60°C / 20 - 80 % not condensing – 25 - 60°C / 20 - 80 % not condensing | |
| Width x Height x Depth | 195 x 330 x 620 mm | |
| Weight | 16 kg | 19 kg |
| Approvals | CE, FCC Class A | |
Component height Outside dimensions increased after separation: typically 0.2 mm
The milled groove may be interrupted by cutouts to a length of up to 5 mm.